Already finished:
1. Cutting; aluminum plate, grinding edges, bending
2. Ask Sander if he can use someone from the wood workshop? Yes,
you need to buy 300 or 400 sand paper yourself
3. I have asked about CNC cutting. I need to go there on Thursday morning. I need to prepare the stl file. Pay attention to modifying the file. It should not be smaller than 2mm. Bring the cut wood with
Waiting list:
1. Buy screws
2. There are two directions for modifying and confirming product details. Today I discussed with nol and he suggested that we can increase the degree of surprise in the user process.
Direction 1: Unify the style and use the same materials
Direction 2: Contrast two styles, contrast between industrial materials and furniture materials, such as wood for small doors and metal for large doors.
Two directions for adding detail:
----The first direction is to add the details of the cabinet below, similar to the basement after the small door is opened.
----The other is to increase the space behind the small door and add details.
3. Determine the size of the drawer gap
4. Check to see if the anodizing package has arrived.
5.Add details on the small door , (how to combine ceramic with aluminium?
6.Test the big door!
Already finished:
1.切割;铝板， 打磨边缘， 弯折
2.询问sander 可以用木工坊的？可以， 需要自己买 300，400 sand paper
3. 已问CNC 切割 需要周四早上去 需要准备好stl 文件 ，注意修改文件 ，不要小于2mm ，带切割好的木头去
Waiting list:
1. 买螺丝
2. 修改确定产品细节 有两个方向 ,今天和nol 讨论 他建议可以增加用户使用过程的惊喜程度，
方向一 统一风格，材料都用一样的材料
方向二 两种风格对比，工业材料和家具材料的对比，例如小门用木头，大门用金属。
增加细节的两个方向：
----方向一是增加下面橱柜的房屋细节 类似于小门打开后的地下室
----另一个是增加小门后面的空间 增加细节
3. 确定抽屉缝隙的大小
4. 看anodizing套餐有没有到
Comments